M-FEP3 is Japanese FEP for the UIQ3 device. It is possible to use it even by the QWERTY model and 10 key model. The device that can be used is "P1i" "P990i" "M600i" "W950i". However, it is necessary to install "M-FEP310FC" in 10 keys to the flip of P990i.

Compatiable Devices

* P1i
* P990i(M-FEP310FC is necessary for the 10 key on flip.)
* M600i
* W950i
How to use:

* If it is P990i in the application for which M-FEP3 can be used, the state icon is displayed downward. (M600i is displayed upward) Please it doesn't use it by a part of application in the DevCert(13 Capabilitys).
o [Possible to use]:Notes, Documents, Therd-party Applications(Papyrus, Opera Mobile ...)
o [Not possible to use]:Web, PIM Applications, MIDP Applications
* The Chinese character doesn't output in the candidate when the Chinese character is converted if the dictionary doesn't exist.
* The input mode can switch the full key mode by "Shift+Space". 10 keys mode can be switched by pushing "*" after "#" is pushed.
* "Alphabet mode" and "Chinese character mode" alternately change into the input mode in the full key mode. It changes in ten key mode in order of "Figure mode"->"Chinese character mode"->"Alphabet mode".
* The Chinese character conversion is does a space key or a top and bottom of the jog dial.
* The icon becomes purple if "Alt+Space (Alt+Shift)" is pushed ("#" is pushed in ten key mode.) in the full key mode and it becomes a short cut mode.Afterwards, when an appropriate key is pushed, the following operation is done.
o A,1:All select
o S,2:All select and cut
o D,3:255 characters are cut form the head
o C,4:Copy
o X,5:Cut
o V,6:Paste
o B,0ebug mode(following description)
o N,8:End of debug mode
o 7:Space
o 9:Enter
o Kisplay/non-display of symbol window
+ When the key to each keyboard is input while displaying the symbol window, the corresponding symbol is input.
+ The position where the window is displayed moves up and down when the top and the cursor key or Jog is input while displaying the sign window.
+ The symbol window shuts excluding the short cut "k" when focus lost (e.g:back key and screen tap, etc.).
* It enters debug mode when "B" is pushed after "Alt+Space" is pushed. (It enters debug mode for 10 key mode when "0" is pushed after "#" is pushed.)
o "0:None"->"1:Key code"->"2:Key code(Excluding 0)"->"3:Modifier key code"->"4:Modifier key code(Excluding 0)"->"5:Scan code"->"6:Scan code(Excluding 0)"->"7:Key event"->"8:Key event(Excluding 0)"->"0:None"
* A setting dialog displays to select "Text input->Hanwriting->Select M-FEP3->Setup" (A set value is saveed besides M-FEP310FC.)
o Config:
+ InputType(10Key/FullKey(*)):10 keys mode or full keys mode can be selected.
+ DefaultMode(NoConv(*)/Kanji):The initial state of the input mode can set it. But, it doesn't support it for "Kanji".
+ CenterKeyMode(10Key)(TmpDecision(*)/FullDecision):The function of a central key to the hiragana input in 10 keys mode is set.
+ InlinePos_Y(16):The Y-Position of an in-line window is set.
+ IconPos_X(158):The X-Position of an icon is set.
+ IconPos_Y(Offset)(0):The Y-Position of an icon is set. It is an offset from the default position.
+ Icon always disp:Please remove the check while movie is reproducing when the icon is obstructive.
+ InputMode(BT-KB)(63488):Please specify the key code used as an input mode switch key when the Bluetooth keyboard is used. Default is "blue Fn+Z" (only Stowaway Keyboard).
+ Shortcut(BT-KB)(63509):Please specify the key code used as a short cut mode switch key when the Bluetooth keyboard is used. Default is "blue Fn+X" (only Stowaway Keyboard).
+ SymbolWin Type(QWERTY):The key array of the symbol window is selected. It is possible to select it from t use of "QWERTY", "QWERTZ", "AZERTY", and "Don't use".
+ Clock Type(None):The clock is displayed at the right of the state display icon. The date is displayed by "Full" in "Clock Only" only at time (24h display).
o SubConv:The candidate who uses it as subconversion can be selected.
o Version:The version can be confirmed.
o about:There is a reset setting most below. When the dialog is shut after "Execute!" is selected, a set value is initialized.
* It Supports to "Stowaway Bluetooth Keyboard". However, because the driver for UIQ3 device doesn't exist now(07/01/21), the operation for which it hopes with a part of key and the modification key might not be obtained. Please push the following key when changing from the keyboard to the input mode and the short cut mode.
o Blue Fn+z(possible to change):Change input mode
o Blue Fn+x(possible to change):Change shortcut mode

Sign it before installation.

Attached Files

	MFep3_100_none.rar (50.6 KB, 15 views)
	MFep3Dic_ML_130.rar (413.7 KB, 20 views)

__________________