Page 1 of 27 12311 ... LastLast
Results 1 to 10 of 270

Thread: Flash, Update, Unlock, Downgrade Your Nokia(BB5) without BOX!!!

  1. #1
    Join Date
    Jan 2009
    Posts
    98
    Likes (Given)
    0
    Likes (Received)
    17
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    1335

    Thumbs up Flash, Update, Unlock, Downgrade Your Nokia(BB5) without BOX!!!

    Flash,Update,Unlock,Downgrade Your Nokia(BB5) without BOX!!!

    - Just download the JAF sw and its Emulator and run emulator, if you wanna flash or reset security code run JAF MAIN, if Unlock then run JAF UNLOCKER.

    COMPLETLY TESTED AND WORKING LIKE CHARM

    ------------------------------------------------------------------------

    How to work with flasher ?

    1.mark "manual flash" then press on MCU and PPM and CNT one by one and select the required flash image files.
    ( MCU: main image file, larger than other PPM: it contain language pakages CNT: it contains multimedia files )

    2.connect completly turned ON phone to USB and select PC SUITE mode from the pop-up menu, drivers should be installed.

    3.for normal flashing only mark "CRT 308" , "Factory Settings" , "Normal Mode" and press flash

    4.for flash dead phones only mark "Dead USB" , "Normal Mode" , "Factory Settings"and press flash then do simple 1 power on phone.

    5.for downgrade phone's firmware only mark "Downgrade", "CRT 308", "Normal Mode", "Factory Settings" and press flash (phone should be ON for downgrade)

    ------------------------------------------------------------------------

    - here some screen shot and status logs of its work :



    Status LOG of Dead USB Flashing :

    Code:
    JAF version 1.98.62
    Detected PKEY: 9000A86B
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 6.86.15.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a
    APE Variant file: NONE
    Languages in ppm: English,German,Finish,Swedish,Danish,Norwegian,Icelandic
    Detected P-KEY: 9000A86B
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 06.02.002
    	Elf2flash 02.33.000 RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ...................Loader Sent!
    Stage 2 starting...............................................................Loader Sent!
    Stage 3 starting..................Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 1424, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
    Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
    Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
    Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
    Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
    Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
    Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
    Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
    Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
    Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a...
    Erasing cmt zone 01080000 - 015FFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a...
    Erasing cmt zone 01600000 - 01FDFFFF ... Erase result: 0000
    Send CMT CFG...
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
    Sending CMT HASH for NOLO
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... 
    Sending CMT HASH for UPDAPP
    Sending CMT HASH for DSP0
    Sending CMT HASH for MCUSW
    Sending CMT HASH for PMM_CONF
    Sending CMT HASH for SBIF_CONF
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: V 06.60
    21-05-08
    RM-217
    (c) Nokia.		   
    APESW: (null)
    VariantSW: (null)
    Prodcode: 0537631
    Done!


    Status LOG of downgrade flashing :

    Code:
    JAF version 1.98.62
    Detected PKEY: 90009A4F
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 6.86.15.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.ppm_a
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.image_a
    APE Variant file: NONE
    Languages in ppm: English,German,Finish,Swedish,Danish,Norwegian,Icelandic
    Backing up CRT...
    Detected P-KEY: 90009A4F
    P-key nokia module version 01.02
    Init usb communication...
    Reading IMEI...
    C:\Program Files\ODEON\JAF\ProgData\359538017854627_CRT_backup_2144191.pm
    Done!
    Backup CRT OK!
    Preparing for downgrade...
    Detected P-KEY: 90009A4F
    P-key nokia module version 01.02
    Init usb communication...
    Phone ready for downgrade!
    Detected P-KEY: 90009A4F
    P-key nokia module version 01.02
    Init usb communication...
    Searching for phone...Found
    Reading SW version...06.60 
    Reading battery value...3999 mV
    Init usb flashing...
    Reading flashid... 128k flash detected.
    CMT: 220800EC <=> SAMSUNG (SEC) -> K8F5615ETM/K5G5629ATD
    APE: 00000000 <=> Flash -> not detected
    Verifing ADL communication... Status byte 2
    Scanning selected flash files...
    Found CMT ULO server in flash file...
    ADL->Loader: Update Application Loader -> Single Chip
    Loader len: 240192, CHK: 0x26DB
    ADL -> Sending loader...
    ................................................................................
    ..............................................
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 0400
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 1408, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw...
    Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
    Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
    Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
    Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
    Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
    Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
    Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
    Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
    Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.ppm_a...
    Erasing cmt zone 01080000 - 015FFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.image_a...
    Erasing cmt zone 01600000 - 01FDFFFF ... Erase result: 0000
    Send CMT CFG...
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.mcusw...
    Sending CMT HASH for NOLO
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... 
    Sending CMT HASH for UPDAPP
    Sending CMT HASH for DSP0
    Sending CMT HASH for MCUSW
    Sending CMT HASH for PMM_CONF
    Sending CMT HASH for SBIF_CONF
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.ppm_a...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__05.50.image_a...
    Writing 128k page converted flash...
    Rebooting...
    Restarting CMT...
    Pooling phone...
    MCUSW: V 05.50
    14-08-07
    RM-217
    (c) Nokia.		   
    APESW: (null)
    VariantSW: (null)
    Prodcode: 0537631
    Done!


    DOWNLOAD LINKS :
    JAF 1.98.62 :
    Code:
    [Only registered and activated users can see links. ]
    JAF 1.98.62 Emulator :
    Code:
    [Only registered and activated users can see links. ]
    Nokia Flashing Cable Driver :
    Code:
    [Only registered and activated users can see links. ]
    Nokia Connectivity Cable Driver :
    Code:
    [Only registered and activated users can see links. ]

  2.    Advertissements


  3. #2
    Join Date
    Dec 2008
    Age
    43
    Posts
    56
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    966

    Smile

    hi

    will it work with my n95

  4. #3
    Join Date
    Mar 2009
    Location
    INDIA
    Posts
    13
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default

    When it will start it says p-key dongle not detect plese insert activated dongle what thats mean ?

  5. #4
    Join Date
    Mar 2009
    Location
    INDIA
    Posts
    13
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default

    Can any 1 help me my n80 is dead

  6. #5
    Join Date
    Mar 2009
    Age
    27
    Posts
    0
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default

    r it work in 3110c

  7. #6
    Join Date
    Jan 2007
    Location
    Algeria
    Age
    43
    Posts
    19,914
    Likes (Given)
    538
    Likes (Received)
    6499
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    308295

    Default

    Quote Originally Posted by dave111ali222 View Post
    hi

    will it work with my n95
    Yes it will work with every nokia BB5 phone, only you must use USB cable (DKU-2 for old phones: N70, N72, N73, .....)

    Quote Originally Posted by emmoteb View Post
    When it will start it says p-key dongle not detect plese insert activated dongle what thats mean ?
    You must check the installation of emulator, coz this prog doesn't work if the P-Key dongle is missing and the role of the emulator is to replace the P-Key

    Quote Originally Posted by emmoteb View Post
    Can any 1 help me my n80 is dead
    What's your problem mate????

    Quote Originally Posted by bunty_anjum View Post
    r it work in 3110c
    Please go here first [Only registered and activated users can see links. ] and present yourself following the guide
    [Only registered and activated users can see links. ]




  8. #7
    Join Date
    Jan 2007
    Location
    Algeria
    Age
    43
    Posts
    19,914
    Likes (Given)
    538
    Likes (Received)
    6499
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    308295

    Default

    Good post mate and rep + added

    Just remeber one thing


    Don't use (UN)LOCK FUNCTION

    coz it's doesn't work (only with some old BB5 phones like 6630, 6680, 6681, and some few others). With the new BB5 phones don't try, no need it doesn't work even with a JAF box and an acticated P-Key
    [Only registered and activated users can see links. ]




  9. #8
    Join Date
    Mar 2009
    Location
    INDIA
    Posts
    13
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Unhappy

    my n80 is dead when using nsu suddenly the power failer and after 1 hour i have started nsu but it cant find connected phone and also i was used phonix dead phone method but it says turn your phone on and after sometime the flashing failed now how can i will alive my phone plese explain
    THANX in advance .
    Last edited by emmoteb; 18-03-2009 at 12:54 PM.

  10. #9
    Join Date
    Mar 2009
    Age
    27
    Posts
    1
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default

    Thanks for thi useful post

  11. #10
    Join Date
    Mar 2009
    Posts
    0
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default

    Thanks!!!
    It realy works. I just made a DOWNGRADE on N70 (for language pack),
    from 5.0737 to 5.0638, than update 5.0705.
    Ciao tutti!!! :000a4:

Page 1 of 27 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •