Everything should be done at your own risk


Its easy to use this software... you just need your PC to copy and paste to your memory stick... averything else will be interfaced with your PSP

This is the one you have been reading about-The one where you can:

** upgrade fat and slims to 3.80M33-5
** upgrade fats to 3.80M33-5 w/ 1.50 kernel patch
** downgrade phat to 1.50
** upgrade phat straight to 3.52 M33 from Extended Boot Menu then install update 4 no need to downgrade to 1.50
** start up PSP with Ultimate Loader with support For choosing which Pandora's you reach V1, V3, and now V4!
** boot to XMB with pandora battery inserted(Phat Only)
** boot to a full 1.50 from Mem Stick (Phat Only)
** use PSPFiler and other tools (If it requires 1.50 slims can't)
** Recover any bricked psp (Fat or Slim)

All from one memory stick...

The best thing about this, is that all you need to create your pandora battery, and your Ultimate Magic Stick, is a custom firmware enabled psp...No more confusing mspformat commands and IPL manipulation...You dont even need to use your computer-except to transfer the files to your PSP [Vista users rejoice!!]-If you can run a cso from your psp-you too can have the power of Pandora in your hands! All from an easy to use GUI-enabled installer that runs from your psp-


All you need is as follows:

* - A PSP with any custom firmware. ANY custom firmware will do good

* - A battery, it can be a phat or slim battery... the good thing is you can convert it back

* - A memory stick 256MB - 2GB only. Higher memory sticks are not supported

* - 1.50, 3.71, and 3.80 official Sony firmware updates. Just look for it in the net, its easy to find them

* - The installer that you can download [Only Registered users can see links . Click Here To Register...]

################################################## #############################


Lets get Started:

STEP 1 - Custom Themes should be disabled and WLAN must be turned off.


STEP 2 - Format your memory stick(from the psp menu)-{make sure you back up any game saves, MP3's, etc, beforehand}that you plan to use as the UPMS-For those of you with fake memory sticks use the format memory stick option from the UPMS installer


STEP 3 - Go into USB mode and copy the UPMS installer.cso into your ISO folder

Copy the 1.50 update to the root of your memory stick-named as 150.PBP

Copy another 1.50 update to the root of the mem stick and name it UPDATE.PBP
now you have two 1.50 update with different file names

Copy the 3.71 update to the root of your memory stick-named as 371.PBP

Copy the 3.80 update to the root of your memory stick-named as 380.PBP

STEP 4 - Exit USB mode and run the UPMS program from the XMB as you would an ISO or cso. (make sure your NO-UMD is set correctly in recovery mode-SONY NP9660)

################################################## #############################


Note: The first time you run the program, you should press X then after sometime, the screen will go back to XMB, start the program again and then press X again.

Step 1 - Select the 'sleep fix Multi-IPL' option

Step 2 - Backup your eeprom, then create Your battery

Step 3 - Install UPMS with utilities (slowest)-It may take a while-Please be patient.

Congratulations!!! You now have the ultimate magic stick and pandora battery!!!

Now, remove the magic stick and pandorized battery and follow the next steps in order to put them in the bricked or the psp with official firmware.

################################################## #############################

FAT PSP:
->Switch off your psp
->Insert the UPMS memory stick
->Hold down the L trigger button
->Insert Pandora battery
->Release L trigger button when the Ultimate Loader menu appears
(If your psp boots to the XMB, it means you didn’t hold the L trigger button down)


SLIM PSP:
->Important: Make sure DCv3/v4 (cemetery) was the last active folder used, or you will have trouble getting the UL menu to light up-some people have had problems in the past attempting to use the UPMS on slim psps because of this...
In which case you will need to do the following:
->Power off and remove your slim battery.
->Push the power switch down so its in the HOLD position
->Insert the UPMS memory stick
->Now hold L and insert your Pandora Battery.
->Release L when the MEMORY STICKS light or screen flashes
->Ultimate Loader will then switch the active folder to the cemetery or DCv3/4
->Carefully return the power switch to the middle or the ON position-making sure you dont put the psp in sleep mode


The menu will contain:
-- Load Pandora Extended Menu (Hellcat) - available on phat only
-- Load Pandora Menu Launcher (The Joker) - available on phat only
-- Load Despertar Cementerio v3
-- Load Despertar Cementerio v4
-- Tools Menu
-- Toggle USB (ms0)

################################################## #############################


Menu Descriptons:

Hellcat Menu - NOT AVAILABLE ON SLIMS
This is the Extended Pandora Boot Menu(EPBM).

NOTE: Make sure your wi-fi switch is OFF or in the down position before using this menu-otherwise you may encounter a blank screen, or some of the menu options will not appear. In which case you'll have to take out and re-insert the battery.

Actions:
-Boot to full firmware (from memorystick)- This will only boot your psp to a full 1.50 firmware for testing, etc..
-Go to Pandora mainmenu-This is where you launch original Pandora v1 (unbrick/downgrade to 1.50)
-Boot PSP from internal flash- This will boot your psp as it normally would-if flash is corrupted, it wont boot.
-Fix flash1:/ (format and create directories)– used for formatting flash1-resets configuration files
-Launch app with flash0:/ access- From here you can select your app by changing the path to point to the 'keycleaner' folder
-Launch CFW installer-This is where you would update to 3.52M33(This needs to be setup first before you can use it-
You do this by doing the following:
-Boot into Ultimate loader
-Select Hellcat menu
-Scroll to 'Launch CFW Installer'
-Press 'O' to choose your path
-You will want to scroll to '352UPDATE' from the drop down menu, and select it using the X button
-It should now say "new path saved"
-Now when you select 'Launch CFW Installer', just press X, and it will take you to the 3.52M33 installer after doing the preparations(on the brown screen-)
-This will install 3.52M33 (first release)
[NOTE: you have to run the m33-4 update from the XMB under the GAME menu when you are done…It’s the one with the calendar])
-USB Options-Pretty straightforward, connects your psp to USB

################################################## #############################


Joker Menu - NOT AVAILABLE ON SLIMS
This is the Pandora Menu Launcher by TheJoker

Actions:
-Despertar del Cementerio v3–This is where you upgrade fat or slim PSP’s to 3.71M33-2 or official Sony 3.71-You can also backup or restore NAND images (NOTE: You will have to run the 1.50 kernel patch (for fat PSP’s only) from the XMB under the GAME menu)
-Pandora main menu– This is where you launch original Pandora v1 to unbrick/downgrade to 1.50, as well as backup or restore NAND images.
-Pandora battery creator-From here you can create a Pandora battery, or restore your Pandora battery to a normal working battery.
-Simple IPL Patch (TA-082/086)-You can patch the IPL with this custom IPL so you can unpatch Key 5 for TA-082/086 (use at your own risk-Recommend using Chilly Willy’s Keycleaner)
-KeyCleaner 1.4–This is Chilly Willy’s KeyCleaner- Where you can analyze, fix, backup, and repair IDstorage keys (for advanced users only)
-IDstorage Manager 1.3-Same as KeyCleaner-You can also edit and create IDstorage keys (again, for advanced users only)
-PSP Filer 4.4–Simple file manager for PSP where you can copy, move, delete, and rename files
-USB Connection–Gain access to your memory stick, flash0, and flash1 folders
-Run (ms0:/kd/home1/EBOOT.PBP)–You can run homebrew apps, etc from here up to 5 spots (home1-5)


################################################## #############################


Despertar del Cementerio v3-(Standalone)

This is where you upgrade fat or slim PSP’s to 3.71M33-2 or official Sony 3.71-You can also backup or restore NAND images (NOTE: You will have to run the 1.50 kernel patch (for fat PSP’s only) from the XMB under the GAME menu)


################################################## #############################


Despertar Cementerio v4-(Standalone)
This is what is used to update your psp to 3.80M33-5 custom firmware, or official 3.80 firmwares as well as dumping and restoring NAND images-Again you will have to run the 1.50 kernel patch from the XMB menu after you update to 3.80M33-5 (fats only)

################################################## #############################


Tools Menu (by jasOnuk)
*Launch elf files from this menu
*Included are two Elf files. NANDManager and NANDTool
*Elf Creation
1.Use PBP unpackerand extract the data.psp file
2.Rename data.psp to “anything you like”.elf
If named “anything”_FAT.elfor “anything”_SLIM.elfit will only work for that model and will be grayed out for the other
3.Place your new elf in the elf folder
4.Run app and launch elf


################################################## #############################

IF YOU ARE USING A SLIM PSP AND BATTERY FOR YOUR U.P.M.S YOU MUST RETURN THE BATTERY BACK TO ITS NORMAL MODE OTHER WISE YOUR PSP WILL NOT SWITCH ON


WARNING
Be careful if installing MaxSafe, while testing we came across a few issues using it to downgrade a 3.71 psp to 1.50, it will not write the IPL and you will end up with a brick.
You have been warned.



################################################## #############################

"BTW Im not the one who originally made this whole tut, I just added somethings and improved and simplify the content."

__________________
-
-

To convert the pandora battery back to normal one:

Step 1 - turn off your PSP and remove the battery

Step 2 - The magic stick or pandora stick should still be in the psp

Step 3 - connect the AC adapter and turn on the power of the PSP

Step 4 - Put in the pandora battery then run the UPMS program again in the magic stick

Step 5 - You can now select to make the battery a normal one in the second option of the menu.

Lastly, exit the menu and your done

__________________
-
-