Ok now everything is installed on my VMWare, the phone is connected and detected well (let's give a try with virtual USB, I don't care for the phone it's my company mobile ^_^)
Let's give it a try !
Actually, I have one question before to flash : Phoenix asks for files of type "Image", "PPM" and "Content", where to put my files .ppm_c, .mcusw and .image_c_fr ?
.mcusw -> Image
.ppm* -> PPM
image -> content <- This file contains the pre-installed software, so if you get one from a 6300i it might have Nokia maps.
Thanks ! So I musn't put the .image file in the "Image" box of Phoenix, it's confusing !
Do I have to check "Full factory set" ?
Please let me know if I have to check other things before to launch it ^_^
Make sure you mabe a backup off all the setting and your contacts in the phone. Also make a backup of the certificates in Phoenix ( product->User Settings->All settings) These certificates get messes up some times during the flash and you will not be able to connect to Wifi/UMA without them. (if you are with t-mobile)
Not sure where you see Full factory Set. If you don;t check it here you can do a full factory reset from the phone any time.
When I go to "product -> user setting -> all settings" it says :
"Not able to get access to current data package.
HRESULT 0x840e0806 (-2079455226)
Framework: The data package was not found from the directory(-ies) set in the search path."
Also, when I click on the ".." button after "product code", it says "Neither DP1.0 nor DP2.0 was found for the Product, or the Product cannot be identified. Only "Auto-detect" will be available.
I don't really understand those things... I only copied the .ppm, .mcu and .image files on the virtual computer desk, do I have to copy the whole RM-322 folder ?
How do I put my phone in test mode ?
I got two installer with the RM-322 (6301) and RM-337 (6300i) files, I just copied the 3 necessary files to the virtual machine but I will extract both complet packages at the end.
In Phoenix once it detects your phone right under the menu you can set the Operating mode of your phone.
Ok I found the "Test" operating mode and I decompressed both package, now let's go further...
First, the backup of all settings went fine now !
Now, the firmware window corresponds to my phone. I've changed the product code to the "regular" version (without any Orange component) and I changed the content file to the one from the 6300i, let's get c-r-a-c-k-in' !