Results 1 to 6 of 6

Thread: All China Phone code & other

  1. #1
    Join Date
    Jul 2008
    Posts
    6
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Lightbulb All China Phone code & other

    All China Phone code & other


    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard

    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change language
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''

    .................................................. ...............................
    N95Pda and N95S Pinout
    2x5
    4:Rx
    5:TX
    6:GND
    .................................................. ...............................
    K1 Moto Pinout
    4:Rx
    5:Tx
    6:Gnd
    .................................................. ...............................
    PDA ZT6618
    1........8 pin mini Conector
    3:Rx
    4:TX
    5:Gnd
    .................................................. ...............................
    Cect 8380
    1..........8 pin mini Conector
    1:Gnd
    2:Rx
    3:Tx
    .................................................. ...............................
    KG-200
    4:Gnd
    3:Tx
    2:Rx
    .................................................. ...............................
    N91I
    1..............12 pin Connector
    .
    5:Gnd . 12:Tx
    6:Tx . 13:Rx
    7:Rx .
    ==============================================
    All Chinese Mobile Code And Pinouts
    --------------------------------------------------------------------------------
    hi
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard

    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#

    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    set default language: *#0000# Send
    set English language: *#0044# Send
    set English language (new firmware): *#001# Send

  2.    Advertissements


  3. #2
    Join Date
    Dec 2009
    Posts
    1
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Question Sos

    Hi san_dj3,

    I have seen the service codes for Chinese phones you had sent to the forum, and I thought you might know the code I need. I have a Lixin N1 phone and I would like to enter Engineer mode. I have tried all your codes but neither worked.
    Could you please help me?

    Thanks,
    Julia Weisz

  4. #3
    Join Date
    Jan 2010
    Posts
    1
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default same problem

    im having the same problem too with the lixin N1 phone, i need the engineer code too, please help

  5. #4
    Join Date
    May 2009
    Age
    26
    Posts
    2
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default

    thanks for share

  6. #5
    Join Date
    Jan 2010
    Age
    38
    Posts
    1
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Thumbs down

    Ii have a china phone - blackberry 8900, most of the codes posted in forums does'nt work for me. Does anybody know codes specific for this model?

  7. #6
    Join Date
    Mar 2010
    Posts
    2
    Likes (Given)
    0
    Likes (Received)
    0
    Dislikes (Given)
    0
    Dislikes (Received)
    0
    Rep Power
    10

    Default

    thx grt collection

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •