SHORT Instructions:
1. Connect DKU-5 or normal COM cable to computer
2. Set proper COM cable (must be, between 1 and 9)
3. Download unlocker, run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg and write here proper COM port (1-9)
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Click READ PHONE
7. Click MAKE LOG, log will be created
8. Enter codes to phone (in /psw/ dir), or
9. Click SP UNLOCK to enter codes via FBUS
EXTENDED INSTRUCTIONS:
******* CONECTION ******
For this program you need Fbus cable like DK5, CA43 or similar conected to ports from COM1 to
COM9.
First unpack zip fiole and strat install.bat
In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any text editor change your COM port setings!
******* USING ********
Program can be started successfully only if is COM port in file
"c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.
READ PHONE:
***********
Reading info data from phone and making BACKUP file for that phone( Field 308,1).
IMPORTANT DO NOT delete or modify that file because can save your *** if something goes
wrong.
WR BACKUP:
***********
With that function can write backup file with Field 308,1 if exist in BACKUP folder.
MAKE LOG:
***********
Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim card.
SP UNLOCK:
***********
Making unlock with codes calculated by BB5_calc.exe.
SP UNLOCK PROCEDURE
Connect cable to PC and be shure com port is adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without Sim card.
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on screen.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP UNLOCK and unlock your phone.
That is all folks
If you got unlock codes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is
"aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is
"bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function
I've run install.bat, set the correct com port then run BB5logunlocker.exe.
I Click READ - says DONE, I Click Log - says DONE.
After this I click BB5_calc.exe - I get ERROR Log files NOT found.
Any way to fix this?
Hi guys a bit of a prob for me
connected the phone ran the install file then pressed read phone it says wait then gives an error
" bad Connectİon.(check Fbus Cable Turn On/off Phone,restart Program Etcc "
can any1 help
thanx
This program by Dejan is NOT a fake or not working program,it SUCCESSFULLY unlocked my nokia 6680 BB5 off of the vodafone network.If you get any problems there just is sumthing you are doing wrong in your procedure of executing the program.
NICE WORK DEJAN!!!!!!
I want to unlock my N73 please need help is this possible?
Anbody tried this method on Nokia N95
i have a dku 5 cable but whenever i connect it to my phone it says handset not supported and i tried connecting it to a 7210 and it connects. does that mean there are differeent versions for dku 5 or all of them work with old fones
hello to all. i swap my old cellphone to a nokia 6270. the problem is i forgot to ask the security code for my cp and now i can't contact the person who owns this nokia 6270. i can't use the software program to sp unlock my phone because i dont have a data cable for my cellphone. could anyone please help me unlock my cellphone here is my serial number: 357579001952326
please help me.
here's my email address [Only registered and activated users can see links. ]
I have Nokia 6630 with the Serial DKU-5 cable but get the error "bad Connectİon.(check Fbus Cable Turn On/off Phone,restart Program Etc)", when I try to create Log.
Does the cable need modifying?
Does any one have diagram to show which pins (from serial) should match what pins on phone?
How can I find out version of RAP3G of my 6630?
Thank You in Advance
Last edited by hussain13; 22-05-2007 at 01:33 PM. Reason: added 3rd question
Bookmarks